* Enter the name of the utility key. You can search descriptions of utility keys.

Multi Line Settings

To display: [Utility][Administrator][Fax Settings][Multi Line Settings]

When multiple lines are used, specify the method to use for each line.

Setting

Description

[PC-Fax TX Line Setting]

Select the line used for PC-FAX TX (default: [No Selection]). If [No Selection] is selected, either line, whichever is not busy, is used for transmission.

[Fax Line Selection]

Tap [Edit] of the line you want to specify the usage for.

On the setting screen of the line specified in [Fax Line Selection], configure the settings as shown below. This example describes a setting screen of [Fax Line 2].

Setting

Description

[Line Parameter Setting]

Configure your environment for using fax functions in Line 2.

  • [Dialing Method]: Select the line type according to your environment (default: [PB]).

  • [Number of RX Call Rings]: If necessary, change the number of times the phone rings before automatically receiving a fax (default: [2] times).

  • [Line Monitor Sound]: When monitoring the communication sound on the telephone line during fax communication, set this option to ON (default: OFF).

  • [Pause Time]: Change the interval required to dial pause (P) (default: [1] sec.).

[Multi Line Settings]

Specify how to use Line 2.

  • [Line 2 Setting]: Select the method to use Line 2 from [TX Only], [RX Only], and [TX and RX] (default: [TX and RX]).

  • [Sender Fax No.]: Enter the fax number of the additional Line 2 (using up to 20 digits, including symbols + and spaces). The fax number you entered is printed as the sender information.