* Enter the name of the utility key. You can search descriptions of utility keys.

FTP TX Setting

To display: [Utility][Administrator][Network][FTP Setting][FTP TX Setting]

Configure the settings for using the FTP Send function.

Setting

Description

[FTP TX]

When using the FTP Send function, set this option to ON (default: ON).

[Proxy Server Address]

Enter the proxy server address. Use one of the following formats.

  • Example to enter the host name: "host.example.com"

  • Example to enter the IP address (IPv4): "192.168.1.1"

  • Example to enter the IP address (IPv6): "fe80::220:6bff:fe10:2f16"

[Proxy Server Port Number]

If necessary, change the proxy server port number (default: [21]).

[Connection Timeout]

If necessary, change the time-out time to limit a communication with the FTP server (default: [60] sec.).

[Port No.]

If necessary, change the FTP server port number (default: [21]).