* Enter the name of the utility key. You can search descriptions of utility keys.

System Connection Setting

To display: [Utility][Administrator][System Settings][System Connection Setting][System Connection Setting]

Configure settings to establish the association of this machine and other system.

Setting

Description

[Prefix/Suffix Automatic Setting]

To automatically add a prefix or suffix to the destination number when using a fax server that communicates in the E-mail format, set this option to ON (default: OFF).

Setting to ON adds the value of registered number 01 in [Prefix/Suffix] ( [Prefix/Suffix] ).

[WebAPI Setting]

Specify the port number used to establish a WebAPI communication.

  • [Port No.]: If necessary, change the port number (default: [60000]).

Tips

If [Prefix/Suffix Automatic Setting] is set to ON, other settings are restricted.

  • [Utility] - [Administrator] - [Fax Settings] are not available (excluding [Destination Check Display Function], [PC-FAX Permission Setting], [Confirm Address (TX)], [Confirm Address (Register)], and [PIN Code Display Mask Function]).

  • In Web Connection, setting is disabled for [Store Address] - [Application Registration].

  • Bulletin Board User Box, Polling TX User Box, Memory RX User Box, and Fax Retransmit User Box are not available.

  • Bulletin Board User Box and Relay User Box cannot be registered.

  • Confidential RX is not available.

  • The Off-Hook key is not available.

  • You cannot configure [Fax Header Settings], [Line Setting], [Quick Memory TX], [Polling TX], [Polling RX], [Timer TX], [Password TX], and [F-Code TX] in the scan/fax mode.

  • The network fax function is not available.

  • [Outside], [Tone], [Pause], [-], and [Line Settings] are not available when registering a fax destination in the address book.

  • You cannot output a report by selecting [Job List] - [Comm. List].

  • A number excluding a prefix and suffix is displayed in [Address] of [Job History].

  • [Report Type] in [Comm. List] is set to [Scan].

  • [Address Type] that appears when you select [JobList] - [Log] - [Details] defaults to [E-mail].

  • [Meter Count] is updated only when [Scans] is enabled in [Scan/Fax]; however, [Fax TX] is not updated.

  • The fax mode is not available.