* Enter the name of the utility key. You can search descriptions of utility keys.

Job Reset

To display: [Utility][Administrator][System Settings][Reset Settings][Job Reset]

Select whether to reset settings for the conditions that are applied when changing users or loading a document into the ADF.

Setting

Description

[Default Basic/Enlarge Display Common Setting]

When simultaneously specifying the default values of the normal screen display and enlarged display, set this option to ON (default: OFF).

If ON is selected, [Default Enlarge Display Settings] is not displayed. Initial values for each mode that are changed in [Default Copy Settings] or [Default Scan/Fax Settings] are applied to both Normal and Enlarge Display modes.

[UserChange]

To initialize all settings (except registered settings) when the key counter or management card is removed, set this option to ON (default: ON).

[When original is set on ADF]

To reset all settings (except registered settings) when document is loaded into the ADF, set this option to ON (default: OFF).

[Next Job]

Select whether to reset Staple Setting, Original Set/Bind Direction settings, and TX Settings for each job.

  • [Staple Setting]: When resetting after the staple job was completed, set this option to ON (default: OFF).

  • [Original Set/Bind Direction]: When resetting after the original loading or bind direction job was completed, set this option to ON (default: OFF).

  • [Reset Data After Job]: Select whether to clear all settings or only destinations when resetting for each job in Scan/Fax TX Settings (default: [Reset All]). If you select [Confirm with User], a confirmation screen appears to check with you if settings or destinations are to be cleared.