Sending
Sending (Basic operation flow)
This section describes how to perform the scan/fax transmission when using the Enlarge Display function.
Load the original.
Tap [Scan/Fax] on the main menu of classic style.
Tap [Enlarge Display] in the side menu.
Specify the destination.
For details on how to specify a destination, refer to [Specifying a Destination] .If [Dest. Settings] is tapped, you can view the list of the selected destinations.
When necessary, tap [Scan Settings] to configure option settings of the scan transmission.
For details on option settings, refer to [Scan/Fax Transmission Option Settings] .
Use the Start key to start transmission.
Using the Stop key enables you to stop scanning the original. A list of the currently stopped jobs is displayed. To stop transmission, select the target job from the list, and delete it.
Reference
Configuring Enlarge Display operations ( [Configuring Enlarge Display Operations] )
Sending after recalling the scan/fax program
The scan/fax program contains a combination of commonly-used settings as one recall key. For transmission, recall the scan/fax program with a single touch of a button on the main screen of Enlarge Display.
The scan/fax program must be registered on the normal screen in advance. For details on the registration procedure, refer to [Registering a Scan/Fax program] .
Load the original.
Tap [Scan/Fax] on the main menu of classic style.
Tap [Enlarge Display] in the side menu.
Tap the icon to recall the program.
Select the program you want to recall, and tap [OK].
The registered content of a program is applied.
Specify a destination if no destination is registered in Program.
For details on how to specify a destination, refer to [Specifying a Destination] .Use the Start key to start transmission.