HomeDescriptions of Functions / Utility KeysMedia Adjustment

Media Adjustment

To display:
  • [Utility]
    • [Expert Adjustment]
      • [Printer Adjustment]
        • [Media Adjustment]

Adjust print defects (voids, white spots, or roughness) that are caused by paper properties for each paper type.

Print after configuration, then repeat adjustments as required.

Setting

Description

[1st Side]/[2nd Side]

Select the side of paper subject to defect adjustment depending on the resolution.

  • [1st Side]: Select this option if defective images are found on the front side of 1-sided or 2-sided printing.

  • [2nd Side]: Select this option if defective images are found on the back side of 2-sided printing.

[Paper Type]

Select the type of paper that is used to adjust defects.

[Adjust Value]

Enter the adjustment value between -8 and 7 (default: [0]).

Increase the value if roughness is detected on a print image, and reduce it if voids or white spots are detected on a print image.