HomeDescriptions of Functions / Utility KeysCentering (Duplex 2nd Side)

Centering (Duplex 2nd Side)

To display:
  • [Utility]
    • [Expert Adjustment]
      • [Printer Adjustment]
        • [Centering (Duplex 2nd Side)]

Adjust the print start position at the left edge of the paper relative to the paper discharge direction for printing the back side in 2-sided printing.

Use the Start key to print a test pattern. Check the test pattern, then, if necessary, repeatedly adjust so that the margin between the left edge and the print starting position is 3/16 inches (4.2 mm) ( 1/32 inches ( 0.5 mm)).

Setting

Description

[Select Tray]

Select a paper tray that is used to adjust the start position for printing.

[Adjust Value]

Enter the adjustment value between -3.0 mm and 3.0 mm (default: [0.0 mm]).

  • Only the plain paper of 8-1/2 11 (A4 ) can be used for adjusting the Bypass Tray.