HomeAccessibilitySending

Sending

Sending (Basic operation flow)

This section describes how to perform the scan/fax transmission when using the Enlarge Display function.

  1. Load the original.

    • When loading the original into the ADF, pull out the Document Stopper (1) to prevent the scanned original from falling.

  2. Tap [Scan/Fax] on the main menu of classic style.

  3. Tap [Enlarge Display] in the side menu.

  4. Specify the destination.

    • For details on how to specify a destination, refer to Here.

    • If [Dest. Settings] is tapped, you can view the list of the selected destinations.

  5. When necessary, tap [Scan Settings] to configure option settings of the scan transmission.

    • Specify the size of the target original in [Scan Size] (default: [8-1/2 11] (inch area)/[A4] (centimeter area)). If you fail to set the original size correctly, the image may be cut off.

    • For details on option settings, refer to Here.

  6. Use the Start key to start transmission.

    • Using the Stop key enables you to stop scanning the original. A list of the currently stopped jobs is displayed. To stop transmission, select the target job from the list, and delete it.

  • Configuring Enlarge Display operations (Here)

Sending after recalling the scan/fax program

The scan/fax program contains a combination of commonly-used settings as one recall key. For transmission, recall the scan/fax program with a single touch of a button on the main screen of Enlarge Display.

  • The scan/fax program must be registered on the normal screen in advance. For details on the registration procedure, refer to Here.

  1. Load the original.

  2. Tap [Scan/Fax] on the main menu of classic style.

  3. Tap [Enlarge Display] in the side menu.

  4. Tap the icon to recall the program.

  5. Select the program you want to recall, and tap [OK].

    The registered content of a program is applied.

  6. Specify a destination if no destination is registered in Program.

    • For details on how to specify a destination, refer to Here.

  7. Use the Start key to start transmission.