HomePrintPrinting on Banner Paper

Printing on Banner Paper

About printing on banner paper

This machine accommodates paper with a length of up to 47-1/4 inches (1200 mm) in the Bypass Tray.

Printable paper

Paper width

Paper length

Paper weight

8-1/4 to 11-11/16 inches (210 mm to 297 mm)

17 to 47-1/4 inches (431.9 to 1200.0 mm)

33-13/16 to 55-7/8 lb (127 g/m2 to 210 g/m2)

Using the printer driver, select the paper type appropriate for the weight of the banner paper to be used.

  • 32-3/16 to 41-3/4 lb (121 g/m2 to 157 g/m2): Thick 1+, Thick 1+ (Side 2)

  • 42 to 55-5/8 lb (158 g/m2 to 209 g/m2): Thick 2, Thick 2 (Side 2)

  • 55-7/8 lb (210 g/m2): Thick 3, Thick 3 (Side 2)

How to print on banner paper

Specify the banner paper size.

  1. On the screen of this machine, tap [Utility] - [Banner Printing].

  2. Select [Allow], and tap [OK].

  3. Check that the system is changed to the banner print job wait state.

    When you have finished the above settings, start to print from the PC.

  4. In [Original Size] in the [Basic] tab, select [Custom Size].

  5. Specify the length and width of the banner paper, and click [OK].

    The [Confirm setting changes] dialog box appears.

  6. Click [Yes].

    The [Paper Tray], [Paper Type], and [Print Type] settings are switched.

    • Change the setting of [Paper Type] for Bypass Tray according to the weight of print paper.

  7. Execute printing.

    A message that prompts you to load paper is displayed on the screen of this machine.

  8. Load the banner paper into the Bypass Tray.

    • For information on how to load banner paper into the Bypass Tray, refer to Here.

  9. When you have loaded a banner paper, tap [Complete].

    Printing on the banner paper starts. Support the ejected banner paper by hand. To continue printing, execute printing from the computer.

  10. Tap [Exit].

    A message confirming the end of banner printing is displayed. To terminate printing, tap [Yes].

    • If there is a queued job, the job is started.