Configuring Original Scan and Output Operations
Settings Anyone can Change
- To specify a paper tray to be selected automatically when [Paper] is set to [Auto] ([Auto Paper Tray Selection Setting])
- To allow paper to be fed out from other tray when the specified paper tray runs out of paper ([Auto Tray Switch ON/OFF])
- To specify an action to be taken when the specified paper is not loaded on any paper tray ([No Matching Paper in Tray Setting])
- To change the default paper tray or printing method when printing a report or list ([Print Lists])
- To adjust the level to be judged between the color specified for [Auto Color] and black and white ([Auto Color Level Adjustment])
- To allow copying of a small-sized original of which the size cannot be detected ([Auto Paper Select for Small Original])
- To adjust the level to detect blank pages when scanning while removing blank pages in an original ([Blank Sheet Detection Level])
- To always enable [Separate Scan] when scanning an original from the original glass ([Separate Scan from Platen])
Settings only the Administrators can Change
- To change the timing to start printing at reception of print/fax data ([Print/Fax Output])
- To specify an output tray to preferentially feed out printed sheets ([Output Tray])
- To specify whether to sort printed sheets by job when feeding out them ([Shift Output Each Job])
- To adjust the Foolscap paper size ([Standard Size Setting])
- To specify whether to print stamps on blank pages inserted by the Cover Sheet and Insert Sheet functions ([Blank Page Print Settings])
- To specify the printing priority sequence or an operation for skipping jobs that are not ready for printing ([Job Priority Operation Settings])
- To specify the default type of paper to be loaded in the bypass tray ([Default Bypass Paper Type Setting])
- To specify whether to apply the paper setting of the printer driver when printing data from a computer using the bypass tray ([Bypass Tray Overwrite Settings for Print PC])
- To specify the position where to print a page number on the front and back sides when 2-Sided Print is specified ([Page Number Print Position])
- To use custom paper with any paper name and paper type registered ([Set Paper Name by User])
- To change the time for lighting up the printing LED after printing was completed ([Print end notification lamp ON time settings])
- To change the original skew adjustment level of the original when scanning it on the ADF ([ADF original skew adj.setting])