Cleaning This Machine

Cleaning the Slit Scan Glass

preconditionPerform this procedure when the Reverse Automatic Document Feeder DF-633 is installed on this machine.

  1. Open the ADF.

  2. Wipe stains off the Slit Scan Glass using a dry, clean cloth.

    NOTICE

    • Do not touch the Slit Scan Glass.

Cleaning the Original Glass, Control Panel, and roller

Wipe the surface using a soft, dry cloth.

NOTICE

  • Do not press the Control Panel hard, otherwise the Touch Panel may be damaged.

CAUTION

  • The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.

Cleaning the outer covers and Original Pad

Wipe the surface using a soft cloth moistened with a mild household detergent.

NOTICE

  • Never use solvents, such as benzene or thinner, to clean the Original Pad.