Configuring Authentication Settings of This Machine

This section explains an example of setting Authentication Type to [ON (MFP)].

  1. Select [Utility] - [Administrator] - [User Auth/Account Track] - [Authentication Type], and configure the following settings.

    Setting

    Description

    [User Authentication]

    Select [ON (MFP)] to employ the MFP authentication.

  2. Select [Utility] - [IC Card Auth.], and configure the following settings.

    Setting

    Description

    [IC Card Type]

    Select whether to permit a use for each IC card type.

    • Specify the authentication destination in [Authentication Assignment Dest.]. You can select the authentication server group or MFP, which is specified in [LDAP-IC Card Authentication Setting], as the authentication destination. In addition, you can specify up to three authentication destinations to search for their user information in parallel.
      Specify [Authentication Assignment Dest.] when [ON (External Server)] or [ON (MFP + External Server)] is selected in [Authentication Type] - [User Authentication] while the IC card type is set to FeliCa, TypeA, MIFARE(PID), or NFC(HCE). The MFP can be specified as the authentication destination only when [ON (MFP + External Server)] is selected in [Authentication Type] - [User Authentication].

    • When using [SSFC], you can register detailed information such as the company identification code or company code.

    • When using [FCF], you can register the section code.

    • When using [FCF (Campus)], you can register the campus identification code.

    • When using [MIFARE(PID)], register detailed information such as the key code.

    [Operation Settings]

    Select how to log in to this machine (default: [Card Authentication]).

    • [Card Authentication]: Logs in simply by placing your IC card on the authentication unit.

    • [Card Authentication + Password]: Logs in by placing the IC card on the authentication unit and entering the password.

    • [IC Card Auth. + PIN Code Auth.]: Logs in by placing the IC card on the authentication unit and entering the PIN code. This setting is displayed when VLAN is set.

    [Auth. Card ID Number]

    Select whether to notify the counter information, which collects the operation conditions of this machine, of the authentication card ID (default: [Ignore]).

Reference