Preparation for Network Connection (for the Administrator)
Checking the network settings
Check that this machine is connected to the network. For details on the check procedure, refer to [Checking the Network Settings] .
Configuring the network printing environment
Change the settings of this machine depending on the required printing protocol.
If the printing protocol is not specified before installation, Normal Printing (Port 9100) is selected for printing. Use Normal Printing (Port 9100) unless otherwise specified by the administrator.
Printing protocol | Description |
|---|---|
Normal Printing (Port 9100) | Make sure that the RAW port number has been set. (In normal circumstances, you can use the default settings.) For details on the setting procedure, refer to [Configuring the Port9100 printing environment] . |
Internet Print (IPP) | Check the IPP operating environment. (In normal circumstances, you can use the default settings.) For details on the setting procedure, refer to [Configuring the IPP printing environment] . |
Secure Print (IPPS) | Set up the IPPS operating environment. Communication between this machine and the computer is encrypted with SSL. For details on the setting procedure, refer to [Configuring the IPP printing environment] . |
Tips
Secure Print (IPPS) cannot be set up using the installer.- The Internet Print (IPP) is not supported in the IPv6 environment.
Enabling device information to be obtained from the fax driver
Disable the OpenAPI authentication function. (In normal circumstances, you can use the default settings.)
If device information collection from the fax driver is enabled, the fax driver automatically collects the information such as optional device attachment and authentication settings.
For details on the setting procedure, refer to [OpenAPI Setting] .
Related setting (for the administrator)- [Assign Account to Acquire Device Info] ( [Assign Account to Acquire Device Info] )