HomeDescriptions of Functions / Utility KeysProhibited Functions When Authentication Error

Prohibited Functions When Authentication Error

To display:
  • [Utility]
    • [Administrator Settings]
      • [Security Settings]
        • [Security Details]
          • [Prohibited Functions When Authentication Error]

Define the severity of penalties applied if an incorrect password is entered during the authentication process.

Settings

Description

[Prohibit Functions When Auth. Error]

Select the severity of penalties applied if an incorrect password is entered during the authentication process.

  • [Mode 1]: If authentication fails, the authentication operation (entry of password) is prohibited for five seconds.

  • [Mode 2]: If authentication fails, the authentication operation (entry of password) is prohibited for five seconds. The number of times, authentication fails is also counted and if the failure count reaches a predetermined value, the authentication operation is prohibited and the machine is set into an access lock state.

[Mode 1] is specified by default.

[Release]

Select an item to be released from Access Lock during authentication failure.

[Release Time Settings]

If necessary, change the time that elapses before an access lock state in the Administrator Setting mode is canceled.

If a predetermined time has elapsed after the machine was restarted, an access lock state is canceled.

[5] min. is specified by default.