Paper Jam in Finisher FS-536

Sections inside the finisher prone to paper jams vary depending on the settings for [Finishing].

Tips

  • The figure shows the Finisher FS-536 equipped with Saddle Stitcher SD-511, Punch Kit PK-520, and Relay Unit RU-515.

NOTICE

  • Do not strongly press or pull the Sensor Pin in the Relay Unit. Doing so may damage the Relay Unit.

CAUTION

  • The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.

Sections inside the finisher prone to paper jams vary depending on the settings for [Finishing].

Tips

  • The figure shows the Finisher FS-536 equipped with Saddle Stitcher SD-511, Punch Kit PK-520, and Relay Unit RU-515.

NOTICE

  • When moving the Saddle Stitcher, be sure to only hold the handle. Otherwise, your hand or finger may get caught in the machine.