Cleaning the Print Head Glass

Printing quality deteriorates if the Print Head Glass is dirty. If this occurs, clean the Print Head Glass according to the following procedure.

  1. Pull out Tray 2.

  2. Remove the Printhead Cleaner from Tray 2.

  3. Open the Lower Front Door of the machine.

  4. Release the Waste Toner Box Lock Lever, then remove the Waste Toner Box.

  5. Slowly insert the Printhead Cleaner all the way to the back end of the Print Head Glass, and then slowly pull it out.

    supplementary explanationRepeat this operation for approximately three times.

  6. Install the Waste Toner Box.

  7. Close the Lower Front Door of the machine.

  8. Place back the Printhead Cleaner to Tray 2.

  9. Close Tray 2.