Loading Paper in Tray 3 or Tray 4

You can load a larger amount of paper into Tray3 or Tray4 than Tray1 or Tray2. It will be convenient to load the most frequently used paper. The following explains how to load paper into Tray3.

1. Pull out Tray3.

   NOTICE

   • Be careful not to touch the surface of the Paper Feed Rollers with your hand.

2. Lift the Paper Feed Rollers, and load the paper with the required side facing upward.

   When printing on letterhead (paper where company names, preset text, and other text or images are already printed), load it with the print side facing down.

   For details on the available paper sizes, refer to [Confirm the Available Paper Sizes] .

   NOTICE

   • Do not load an excessive number of sheets such that the top of the stack is higher than the mark.

   • Do not load custom sized paper into Tray3. When changing the paper size, contact your service representative.

   • If paper is curled, flatten it before loading it.

3. Lower the Paper Feed Rollers, then close Tray3.

4. When loading paper other than plain paper, change the paper type setting.

   For details, refer to [Paper] .