Available Operations in the [Finish] Tab

[Staple]

Select this check box to staple the printed sheets. In addition, specify the number and positions of staples.

When stapling paper at the upper-left corner, you can specify the staple angle. Selecting [Left Corner (Auto)] automatically determines the staple angle depending on the paper size.

[Center Staple and Fold]

Select this check box to staple the printed sheets in two positions in the center.

Use this option when you have set [Print Type] to [Booklet] in the [Layout] tab.

[Punch]

Select this check box to make punch holes (binder holes) in the printed sheets. In addition, specify the number and positions of punch holes.

[Fold]

Select this check box to fold the printed sheets. In addition, select the folding mode.

[Page Fold Setting]

When you have selected [Half-Fold(By Sheet)] or [Tri-Fold(By Sheet)] in [Fold], specify the number of pages to be folded at one time.

[Output Tray]

Select the tray to which the printed sheets are output.

[Paper Arrangement]

Select whether to adjust the binding position on two-sided printed sheets collectively after all data items are received or sequentially each time a data item is received.

• [Prioritize Arranging Papers]: Paper arrangement is performed once after all data items are received. All pages are adjusted under the same conditions.

• [Prioritize Productivity]: Paper arrangement is performed sequentially while printing the pages.