Home>About This Machine>Configuring Authentication Settings of This Machine

Configuring Authentication Settings of This Machine

First, configure the authentication function of this machine (ON (MFP)).

  • This machine does not support external server authentication.

  1. Tap [Utility] - [Administrator Settings] - [User Authentication/Account Track] - [General Settings] - [User Authentication].

  2. Set [General Settings] to [ON (MFP)], then tap [OK].

    • When combining account track settings, tap [Utility] - [Administrator Settings] - [User Authentication/Account Track] - [General Settings], and set [Synchronize User Authentication & Account Track] to [Synchronize]. When separately managing the user authentication and account track, set to [Do Not Synchronize].

  3. Tap [OK].

  4. Select [Yes], then tap [OK].

  5. Tap [Authentication Device Settings] - [General Settings] - [Bio Authentication], and configure the following setting.

    Settings

    Description

    [Beep Sound]

    Select whether to give a "blip" sound when the finger vein pattern is scanned successfully.

    [ON] is specified by default.

    [Operation Settings]

    Select how to log in to this machine.

    • [1-to-many authentication]: Simply place his or her finger to log in.

    • [1-to-1 authentication]: Enter the user name and position his or her finger to log in.

    [1-to-many authentication] is specified by default.

  6. Tap [OK].

  7. If desired, tap [Logoff Settings] to configure automatic logout settings.

    • Select whether to automatically log out when original scanning has been completed (default: [Do not log off]).

  8. Tap [Close] to exit the authentication settings of this machine.