HomeDescriptions of Functions / Utility KeysLeading Edge Adjustment (Duplex Side 2)

Leading Edge Adjustment (Duplex Side 2)

To display:
  • [Utility]
    • [Expert Adjustment]
      • [Printer Adjustment]
        • [Leading Edge Adjustment (Duplex Side 2)]

Adjust the print start position at the leading edge of the paper relative to the paper discharge direction for printing the back side in 2-sided printing.

Use the Start key to print a test pattern. Check the test pattern and adjust so that the margin between the leading edge of the paper and the print start position is 3/16 inch (4.2 mm). Repeat adjustments, as required.

Setting

Description

[Paper Type]

Select the type of paper that is used to adjust the start position for printing.

[Adjust Value]

Enter the adjustment value between -3.0 mm and 3.0 mm (default: [0.0 mm]).