bizhub Remote Access Setting

[bizhub Remote Access Setting]

When permitting a connection from a mobile terminal using bizhub Remote Access, set this option to ON (default: OFF).

[Connection Method]

Select whether to give priority to the operation speed in a mobile terminal or give priority to the image quality of the mobile terminal screen (default: [Standard]).

[Connection Timeout]

If necessary, change the time-out time to limit a communication with the mobile terminal (default: [20] min.).

[Operation Change Screen]

Specify the operation to be performed when the screen of this machine is operated during remote control using a mobile terminal. When displaying the confirmation screen to check whether to continue remote control on the screen of a mobile terminal, set this option to ON (default: ON).

[Connection Permission Screen]

Specify the operation to be performed when a remote control connection request is issued from a mobile terminal while the user is operating the screen of this machine. When displaying the confirmation screen to check whether to allow a connection to this machine, set this option to ON (default: ON).

[Keyboard Link]

When using the Keyboard Link function, set this option to ON (default: OFF).

If the Keyboard Link function is selected, you can use the text entry application on the mobile terminal when entering a text during remote control. You can enter characters using the keyboard, handwriting, or voice input function.

• [Connection restriction]: To restrict the method for connecting to this machine using Keyboard Link, select [Allow only NFC.], then select the connection method to be allowed. If NFC connection is permitted, it can be established by placing the Android terminal on the Mobile Touch Area of this machine. If Bluetooth LE connection is permitted, it can be established by searching for a Bluetooth LE device using bizhub Remote Access and selecting this machine.

[Address Link]

When using the Address Link function, set this option to ON (default: OFF).

If Address Link is selected, you can select an address from the address book on the mobile terminal and set it as the direct-input destination in fax or scan mode.

• [Connection restriction]: To restrict the method for connecting to this machine using Address Link, select [Allow only NFC.], then select the connection method to be allowed. If NFC connection is permitted, it can be established by placing the Android terminal on the Mobile Touch Area of this machine. If Bluetooth LE connection is permitted, it can be established by searching for a Bluetooth LE device using bizhub Remote Access and selecting this machine.

[Panel Link Scan]

When using the Panel Link scan function, set this option to ON (default: OFF).

Using the Panel Link scan function, you can send the image scanned on this machine to the storage of the Android terminal or Google Drive.

For an iOS terminal, its storage cannot be specified as a destination. Specify the Google Drive as a destination.

[Priority start mode]

Select which mode is used to start bizhub Remote Access by placing the Android terminal on the Mobile Touch Area (default: [Panel Link]).