SMB Server Settings

[SMB Server Settings]

When using this machine as the SMB server, set this option to ON (default: OFF).

[SMB Server Common Settings]

Configure common settings to use the machine as an SMB server.

• [SMB Host Name]: Enter the host name of this machine (using up to 15 characters).

• [Workgroup]: Enter the name of the workgroup that contains this machine (using up to 15 characters, excluding ", \, ;, :, , ,*, <, >, |, +, =, and ?).

• [SMB Authentication Protocol]: Select the SMB authentication protocol to be used in the machine (default: [SMB1.0/SMB2.0/SMB3.0]).

• [SMB security Signature Setting]: Select whether to enable the SMB signature of this machine to suit your environment (default: [Only When Requested]).
  [Disable]: Disables the SMB signature of this machine.
  [Only When Requested]: Enables the SMB signature of this machine (server) only when the SMB signature is requested from the client side. If the SMB signature is not requested from the client side, operations are performed while the SMB signature of this machine (server) remains disabled, and a connection is possible even when the SMB signature in the client side is disabled.
  [Required]: Enables the SMB signature of this machine. To establish a connection, the SMB signature is also required in the client side. If the SMB signature in the client side is disabled, it will not be possible to make a connection.

[SMB Print Setting]

Configure the settings to use the SMB Print function.

• [SMB Print]: When using the SMB Print function, set this option to ON (default: OFF).

• [Print Service Name]: Enter a print service name in uppercase letters (up to 12 characters, excluding / and \).

[Share SMB File Setting]

When using the SMB file sharing function, set this option to ON (default: OFF).