HomeDescriptions of Functions / Utility KeysAuto Distribution Setting

Auto Distribution Setting

To display:
  • [Utility]
    • [Administrator]
      • [Security]
        • [Job Log Settings]
          • [Auto Distribution Setting]

Configure a setting to automatically send job logs to the server.

Setting

Description

[Host Name]

Enter the IP address or host name of the destination server.

[File Path]

Enter the destination file path.

[User Name]

Enter the user name used to log in to the destination server.

[Password]

Enter the password used to log in to the destination server.

[Port No.]

Enter the port number for communications.

[Proxy]

When accessing the destination server via a proxy server, set this option to ON (default: OFF).

When the destination server is accessed via a proxy server, the proxy setting configured in [WebDAV Client Settings] (Here) is used.

[SSL Setting]

When accessing the destination server via SSL communication, set this option to ON (default: OFF).

When the SSL communication is established, the SSL setting configured in [WebDAV Client Settings] is used (Here).

[TX terms]

Specify conditions to perform the automatic sending.

  • [Hours, Minutes]: Performs the automatic sending based on the specified schedule. If you select [Monthly], specify the date to send data in. If you select [Weekly], specify a day of week to send data in. If you select [Daily], specify the time to send data at.

  • [Set size]: Performs the automatic sending when the job log data size reaches the specified limit. If [Manual] is selected, enter the capacity in [Job Setting].

[Send Immediately]

Immediately sends job logs.