Using an Additional Line

When multiple lines are used, specify the method to use for each line.

1. Select [Fax Settings] - [Multi Line Settings] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.

   Setting	Description
   [PC-Fax TX Line Setting]	Select the line used for PC-FAX TX (default: [No Selection]). If [No Selection] is selected, either line, whichever is not busy, is used for transmission.

2. In [Fax Line Selection], click [Edit] of the line you want to specify the usage for.

3. On the setting screen of the specified line, configure the settings as shown below.

   • This example describes a setting screen of [Fax Line 2].

   Setting		Description
   [Line Parameter Setting]		Configure your environment for using fax functions in Line 2. [Dialing Method]: Select the line type according to your environment (default: [PB]). [Number of RX Call Rings]: If necessary, change the number of times the phone rings before automatically receiving a fax (default: [2] times). [Line Monitor Sound]: When monitoring the communication sound on the telephone line during fax communication, set this option to ON (default: OFF). [Pause Time]: If necessary, change the wait time when the pause is entered (default: [1] sec.).
   [Multi Line Settings]		Specify how to use Line 2. [Line 2 Setting]: Select the method to use Line 2 from [TX Only], [RX Only], and [TX and RX] (default: [TX and RX]). [Sender Fax No.]: Enter the fax number of the additional line (using up to 20 digits, including symbols + and spaces). The fax number you entered is printed as the sender information.