Fully Using Print Functions

Settings Anyone can Change

To select the optimum quality setting mode for the original ([Image Quality Setting])
To intensify small or faint letters, or to sharpen the edges of images such as text in a table or graphics to improve legibility ([Edge Enhancement])
To reduce the printing density in order to save toner consumption ([Toner Save])
To specify whether to save the next print job on the hard disk when the job is received while another print job is active ([Spool Print Jobs in HDD before RIP])
To specify whether to use paper of a size close to the size specified in Paper Size if the specified paper is not loaded in the paper tray ([A4/A3 <- -> LTR/LGR Auto Switch])
To print a banner page that contains the sender or title of print data ([Banner Sheet Setting])
To specify the line width adjustment method when printing with resolution 600 dpi ([Line Width Adjustment (600dpi)])
To specify the line width adjustment method when printing with resolution 1200 dpi ([Line Width Adjustment (1200dpi)])
To prevent the line width from looking largish in the gray background ([Gray Background Text Correction])
To slightly reduce the entire page when directly printing a PDF, PPML, or OOXML file ([Minimal Print])
To select whether to give priority to the printing quality or printing speed when directly printing an OOXML file ([OOXML Print Mode])
To fold paper ([Fold Type Settings])
To specify the unit of paper to be folded at one time when using Half-Fold or Tri-Fold ([Half-Fold/Tri-Fold Specification Settings])
To specify whether to verify the digital signature when directly printing an XPS or OOXML file ([Verify XPS/OOXML Digital Signature])
To change the default OOXML print settings for direct printing ([OOXML Print Settings])
To change the default combination settings for direct printing ([Page Layout Settings])
To print a report on configuration information of this machine or a font list ([Print Information])
To change the method for determining the paper size when directly printing TIFF, JPEG, or PDF files ([TIFF Setting])
To allow banner printing through a computer ([Banner Printing])

Settings only the Administrators can Change