Replacing a Staple Cartridge
Finisher FS-540/Finisher FS-540 SD
Open the Front Door of the Finisher.
Unlock the Staple Cartridge.
Pull out the Staple Cartridge.
Pull out an empty staple case from the Staple Cartridge.
Insert a new staple case into the Staple Cartridge.
Insert the staple case until it hits the back of the Staple Cartridge, and check that it is locked.
Attach the Staple Cartridge.
Close the Front Door of the Finisher.
Tips
Do not remove staples that remain in the machine. Otherwise, the stapling function will activate but no sheets will be stapled.
NOTICE- Be sure to replace the Staple Cartridge after the relevant message has appeared. If a Staple Cartridge is removed before the relevant message appears, it may result in a failure.
Finisher FS-539/Finisher FS-539 SD
Open the Front Door of the Finisher.
Unlock the Staple Cartridge.
Pull out the Staple Cartridge.
Remove any empty staple cases from the Staple Cartridge.
Attach a new staple case to the Staple Cartridge.
Attach the Staple Cartridge.
Close the Front Door of the Finisher.
Tips- Do not remove staples that remain in the machine. Otherwise, the stapling function will activate but no sheets will be stapled.
NOTICE- Be sure to replace the Staple Cartridge after the relevant message has appeared. If a Staple Cartridge is removed before the relevant message appears, it may result in a failure.