Switching to Power Save Mode Using the Power Key

When using the Power key as a Power Save key (at Factory Default)

When operating this machine in the factory default state, you can press the Power key to switch this machine to the Power Save mode (low power or sleep) or the Sub Power Off mode. Depending on how long the Power key is pressed, the state of the save mode to be activated will differ.

Power key

Status of this machine

Status of Power Indicator

Description

Short press

Low Power mode

(Default)

Flash (blue)

Turns off the display of the Touch Panel to reduce power consumption.

This machine returns to the normal mode when it receives data or faxes or when the user operates the Touch Panel.

Sleep mode

Flash (blue)

Provides power-saving effect higher than Low Power mode. A time required to return to the normal mode is longer than Low Power mode.

This machine returns to the normal mode when it receives data or faxes or when the user operates the Touch Panel.

Hold down

Sub Power OFF

Light-up (orange)

The power saving effect is the same as that of the sleep mode.

While the sub power is turned off, this machine can receive data or faxes, however, it cannot scan or print an original.

If data or faxes are received while the sub power is turned off, they are printed when the machine returns to the normal mode.

To enable the machine to return to the normal mode from the Sub Power Off status, press the Power key again.

Related setting (for the administrator)

When using the Power key as a Sub Power Off key

When [Power Settings] - [Power Key Setting] ( [Power Settings] ) is set to [Sub Power OFF], you can press the Power key to switch this machine to the Sub Power Off mode or ErP Auto Power Off mode. Depending on how long the Power key is pressed, the state of the save mode to be activated will differ.

Power key

Status of this machine

Status of Power Indicator

Description

Short press

Sub Power OFF

Light-up (orange)

This function reduces power consumption and has a greater power saving effect.

While the sub power is turned off, this machine can receive data or faxes, however, it cannot scan or print an original.

If data or faxes are received while the sub power is turned off, they are printed when the machine returns to the normal mode.

To enable the machine to return to the normal mode from the Sub Power Off status, press the Power key again.

Hold down

ErP Auto Power OFF

Flash (orange)

This function provides a greater power saving effect than the sub power off mode, which is close to the state where the main power is turned off.

In ErP Auto Power Off mode, this machine cannot receive data or faxes, and also it cannot scan or print an original.

To enable the machine to return to the normal mode from the ErP Auto Power OFF status, press the Power key again.

NOTICE
  • Note that faxes cannot be received if the ErP Auto Power Off mode is selected in fax mode.