Original/paper setting
Adjusting the paper tray standby position of the ADF
To shorten the time required to start feeding the original, adjust the standby position of the Original Tray for the ADF.
The time required to start feeding the original can be shortened by lifting the Original Tray in advance.
Select [System Settings] - [ADF Settings] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.
Setting | Description |
|---|---|
[ADF Settings] | When lifting the standby position of the Original Tray more highly than usual, set this option to ON (default: ON). |
[Paper Tray] | Enter the standby position adjustment value (default: [1]). Increase the setting value when lifting the standby position, and reduce it when lowering the standby position. |
Configuring the setting to scan the original from the ADF
Specify the original skew adjustment level of the original when scanning it on the ADF.
Select [System Settings] - [ADF original skew adj.setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.
Setting | Description |
|---|---|
[Skew adj. level] | Select the original skew adjustment level of the original when scanning it on the ADF (default: [High]).
|
Setting the manual staple operation
Set the manual staple operation.
Select [System Settings] - [Manual staple setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.
Setting | Description |
|---|---|
[Staple start wait time] | Specify the waiting time from the time when paper is loaded into the manual staple slit to the time when stapling is started (default: [1] sec.). |
[Setting for Manual Staple] | When not changing to the sleep mode to always make the manual staple available, select [Disable sleep mode] (default: [OFF]). |
Tips
This setting is displayed when the option is installed in this machine. For details on the required option, refer to [Administrator settings displayed by mounting options] .
Specifying whether to automatically detect the paper type for each tray
Select [System Settings] - [Paper type auto detection settings] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and specify whether to automatically detect the paper type for each tray (default: ON).
Setting to ON allows you to select [Auto] when specifying the paper type of the tray.
Tips- This setting is displayed when the option is installed in this machine. For details on the required option, refer to [Administrator settings displayed by mounting options] .