HomeDescriptions of Functions / Utility KeysClient Settings

Client Settings

To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [Remote Panel Settings]
          • [Client Settings]

Configure settings to operate the Control Panel of this machine using dedicated software on a different computer.

Settings

Description

[ON]/[OFF]

Select whether to operate the Control Panel of this machine using dedicated software on a different computer.

[OFF] is specified by default.

[Port No.]

If necessary, change the port number of the server where the dedicated software was installed.

[443] is specified by default.

[Connection Timeout]

If necessary, change the timeout time of communication with the server where the dedicated software was installed.

[60 sec.] is specified by default.

[Server Address]

Enter the address of the server where the dedicated software was installed.

Use one of the following formats.

  • Example of host name entry: "host.example.com"

  • Example of IP address (IPv4) entry: "192.168.1.1"

  • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"

[Certificate Verification Level Settings]

To validate the certificate during SSL communication, select items to be verified.

  • [Expiration Date]: Confirm whether the certificate is within the validity period. [Confirm] is specified by default.

  • [Key Usage]: Confirm whether the certificate is used according to the intended purpose approved by the certificate issuer. [Do Not Confirm] is specified by default.

  • [Chain]: Confirm whether there is a problem in the certificate chain (certificate path). The chain is validated by referencing the external certificates managed on this machine. [Do Not Confirm] is specified by default.

  • [Expiration Date Confirmation]: Confirm whether the certificate has expired. [Do Not Confirm] is specified by default.

  • [CN]: Confirm whether CN (Common Name) of the certificate matches the server address. [Do Not Confirm] is specified by default.

[Synchronize WebDAV Client Setting]

To access a server with the dedicated software installed via a proxy server, enter your proxy server.

  • [Synchronize]: Use a proxy server registered in [WebDAV Client Settings].

  • [Individual Settings]: Register a required proxy server separately from the proxy server registered in [WebDAV Client Settings].
    Enter the proxy server address, port number, and the user name and password required to log in to the proxy server.

[Launch Remote Panel from vCare]

Select whether or not to allow the remote panel to be started from the remote diagnosis system.

[Restrict] is specified by default.