HomeAdvanced FunctionCreating a Serverless Pull Printing Group

Creating a Serverless Pull Printing Group

Create a serverless pull printing group on an MFP that is not set to a serverless pull printing group.

LK-114_SetupTool allows you to only set up the configuration of the topology machine in a serverless pull printing group.

  1. Click [Create a Group].

  2. Enter the name of the serverless pull printing group in [Group name], select the check box of the MFP to be assigned to a topology machine in a serverless pull printing group, then click [OK].

  3. Select the check box for [Topology Manager Function], then click [OK].

  4. Enter the MFP administrator password and the OpenAPI user name and password, then click [OK].

    • When not using the user name and password for OpenAPI authentication, only enter the administrator password.

    A serverless pull printing group is created.

  5. Click [Close].

  • To add a storage machine or client machine to a serverless pull printing group or change the configuration of storage and client machines in a serverless pull printing group after setting up the configuration of the topology machine in a serverless pull printing group using LK-114_SetupTool, use the Control Panel of the MFP. When associating multiple serverless pull printing groups, specify the target serverless pull printing groups using Web Connection.

  • A serverless pull printing group cannot be structured over WAN.

  • The default administrator password and the default OpenAPI user name and password can be pre-specified in [Administrator Settings] of LK-114_SetupTool. For details, refer to Here.

  • When composing a serverless pull printing group involving different models, you need to permit the quick authentication. For details on how to permit the quick authentication, refer to Here.

  • A serverless pull printing group can be created in a local environment in which the MFP is not connected to the network. For details, refer to Here.