Operations Required to Use This Function
Checking the LAN cable for connection
Check that the LAN cable connected to the network is connected to the LAN port of this machine.
Checking the network settings
Check that an IP address is assigned to this machine. Tap [Utility] - [Device Information], and check that an IP address is displayed.
If no IP address is displayed, you will need to configure the network. For details, refer to Here.
Configuring the IP address fax environment
Enable the IP address fax function. In addition, configure the sending and receiving functions of this machine (SMTP) and the operation mode for IP address fax.
How to configure the setting is explained using Web Connection. For details, refer to Here.
Registering Header Position
Register the machine name, company name, etc. to be printed on faxes.
For details on how to configure the settings, refer to Here.
Setting the date and time for the machine
Set the date and time on this machine to be printed on sent and received faxes.
For details on how to configure the settings, refer to Here.
If an NTP (Network Time Protocol) is used to set the time, the date and time on this machine can be automatically adjusted. How to configure the setting is explained using Web Connection. For details, refer to Here.