IP Address Filtering
To display: [Utility][Administrator][Network][TCP/IP Setting][IP Address Filtering]
Restrict devices that can access this machine depending on the range of IP addresses.
Setting | Description |
|---|
[IPv4 Filtering (Permit Access)] | Specify an IPv4 address to allow access to this machine.  [IPv4 Filtering (Permit Access)]: When specifying the IPv4 address that allow access, set this option to ON (default: OFF).
Range 1 to Range 5: Enter the range of IPv4 addresses that allow access using the following format.
Entry example: "192.168.1.1 - 192.168.1.10"
If a single IPv4 address is allowed to access, you can only enter the address in one side of the range.
|
[IPv4 Filtering (Deny Access)] | Specify an IPv4 address to deny access to this machine. [IPv4 Filtering (Deny Access)]: When specifying the IPv4 address that deny access, set this option to ON (default: OFF). Range 1 to Range 5: Enter the range of IPv4 addresses that deny access using the following format.
Entry example: "192.168.1.1 - 192.168.1.10"
To deny access from a single IPv4 address, you can only enter the address in one side of the range.
|
[IPv6 Filtering (Permit Access)] | Specify an IPv6 address to allow access to this machine. [IPv6 Filtering (Permit Access)]: When specifying the IPv6 address that allow access, set this option to ON (default: OFF). Range 1 to Range 5: Enter the IPv6 address and prefix length to specify the range of IPv6 addresses that allow access.
|
[IPv6 Filtering (Deny Access)] | Specify an IPv6 address to deny access to this machine. [IPv6 Filtering (Deny Access)]: When specifying the IPv6 address that deny access, set this option to ON (default: OFF). Range 1 to Range 5: Enter the IPv6 address and prefix length to specify the range of IPv6 addresses that deny access.
|