Paper Jam in ADF
NOTICE
When closing the Opening and Closing Guide, press the Hand mark in the center and check that it is locked securely.
Paper Jam at Right-side Door
When removing pieces of paper in the paper tray (Tray 1/2)
Release the lock as shown in the figure, pull out the paper tray, then remove any unnecessary pieces of paper.
CAUTION- The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.
Paper Jam in Paper Tray
When removing pieces of paper in the paper tray (Tray 1/2)
Release the lock as shown in the figure, pull out the paper tray, then remove any unnecessary pieces of paper.
When removing pieces of paper in the paper tray (Tray 3/4)
Release the lock as shown in the figure, pull out the paper tray, then remove any unnecessary pieces of paper.
NOTICE- Be careful not to touch the surface of the Transport Roller with your hand.
CAUTION- The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.
Paper Jam in Large Capacity Unit
NOTICE- Be careful not to touch the surface of the roller with your hand.
CAUTION- The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.
Paper Jam in Finisher FS-540 or Finisher FS-540 SD
Sections inside the finisher prone to paper jams vary depending on the settings for [Finishing].
Tips- The figure shows the Finisher FS-540 SD equipped with Punch Kit PK-526, Z Folding Unit, and Relay Unit.
Sections inside the finisher prone to paper jams vary depending on the settings for [Finishing].
Tips- The figure shows the Finisher FS-540 SD equipped with Punch Kit PK-526, Z Folding Unit, and Relay Unit.
NOTICE- When moving the Saddle Stitcher, be sure to only hold the handle. Otherwise, your hand or finger may get caught in the machine.
Paper Jam in Post Inserter PI-507
Tips- The figure shows the Finisher FS-540 SD equipped with Punch Kit PK-526, Post Inserter, Z Folding Unit, and Relay Unit.
NOTICE- When returning the Upper Unit of the Post Inserter, be careful not to get fingers caught in them.
Paper Jam in Job Separator JS-602
Tips- The figure shows the Finisher FS-540 SD equipped with Punch Kit PK-526, Z Folding Unit, Job Separator JS-602, and Relay Unit.
Paper Jam in Finisher FS-539 or Finisher FS-539 SD
Sections inside the finisher prone to paper jams vary depending on the settings for [Finishing].
Tips- The figure shows the Finisher FS-539 SD equipped with Punch Kit PK-524 and Relay Unit.
CAUTION- The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.
Sections inside the finisher prone to paper jams vary depending on the settings for [Finishing].
Tips- The figure shows the Finisher FS-539 SD equipped with Punch Kit PK-524 and Relay Unit.
NOTICE- When moving the Saddle Stitcher, be sure to only hold the handle. Otherwise, your hand or finger may get caught in the machine.
Paper Jam in Finisher FS-533
Sections inside the finisher prone to paper jams vary depending on the settings for [Finishing].
Tips- The figure shows the Finisher FS-533 equipped with Punch Kit PK-519.
CAUTION- The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.
Paper Jam in Job Separator JS-508
CAUTION- The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.