Adjusting the Touch Panel

Adjusting the brightness of the Touch Panel

Adjust the brightness level of the Touch Panel.

  1. Tap [Accessibility] - [Brightness Adjustment], and also select [Low] or [High] to adjust the brightness.

Continuous-tapping setting

Specify whether continuous tapping of the same key is detected as a double-tap operation.

  1. Tap [Accessibility] - [Double tap setting].

    Setting

    Description

    [Double Tap]

    Detects continuous tapping of the same key as a double-tap operation.

    You can change the double-tap detection interval at five levels (default: [Standard]).

    Double-tap the box at the right of the screen enables you to check the current setting.

    [Tap detection Limitation]

    Inhibits the system from detecting the second and subsequent selections in the specified interval when the same key is tapped continuously.

    When a user continuously touches a key in an involuntary manner, the system prevents it from being mistakenly detected as a double-tap operation.

    Specify the interval to detect the second and subsequent taps (default: [0.1] sec.).

Setting vibration operations of the Control Panel

Specify the strength or pattern of the vibration when a key on the Touch Panel or the Power key is pressed.

  1. Tap [Accessibility] - [Vibration setting].

    Setting

    Description

    [Touch panel button]

    Specify the vibration operation when a key on the Touch Panel is operated.

    • [Tap]: Select whether to enable the vibration when a key on the Touch Panel is operated (default: [Yes]).
      [Vibration pattern]: Select the vibration pattern to be applied (default: [Pattern 3]). If you tap the vibration pattern setting key, you can confirm the pattern to be applied.

    • [Long tap]: Select whether to enable the vibration when a key on the Touch Panel is held down(default: [On]). The vibration pattern applied when a key is held down is different from that applied when a key is operated once.

    [Power button]

    Specify the vibration operation when the Power key is operated.

    • [Long tap]: Select whether to enable the vibration when the Power key is held down (default: [On]). The vibration pattern applied when the Power key is held down is different from that applied when a key on the Touch Panel is operated.

    [Vibration Intensity.]

    Specify the strength of the vibration when a key on the Touch Panel or the Power key is operated (default: [Medium]).

    If you tap the vibration strength setting key, you can confirm the strength to be applied.