* Enter the name of the utility key. You can search descriptions of utility keys.

Media Adjustment

Adjust print defects (voids, white spots, or roughness) that are caused by paper properties for each paper type.

Print after configuration, then repeat adjustments as required.

Setting	Description
[1st Side]/[2nd Side]	Select the side of paper subject to defect adjustment depending on the resolution. [1st Side]: Select this option if defective images are found on the front side of 1-sided or 2-sided printing. [2nd Side]: Select this option if defective images are found on the back side of 2-sided printing.
[Paper Type]	Select the type of paper that is used to adjust defects.
[Adjust Value]	Enter the adjustment value between -8 and 7 (default: [0]). Increase the value if roughness is detected on a print image, and reduce it if voids or white spots are detected on a print image.

Setting

Description

[1st Side]/[2nd Side]

Select the side of paper subject to defect adjustment depending on the resolution.

[1st Side]: Select this option if defective images are found on the front side of 1-sided or 2-sided printing.
[2nd Side]: Select this option if defective images are found on the back side of 2-sided printing.

[Paper Type]

Select the type of paper that is used to adjust defects.

[Adjust Value]

Enter the adjustment value between -8 and 7 (default: [0]).

Increase the value if roughness is detected on a print image, and reduce it if voids or white spots are detected on a print image.