* Enter the name of the utility key. You can search descriptions of utility keys.

E-mail RX (POP)

To display: [Utility][Administrator][Network][E-mail Setting][E-mail RX (POP)]

Configure the settings to enable this machine to receive an E-mail.

Setting

Description

[E-mail RX Setting]

When receiving E-mails on this machine, set this option to ON (default: ON).

[POP Server Address]

Enter the address of your E-mail server (POP). Use one of the following formats.

  • Example to enter the host name: "host.example.com"

  • Example to enter the IP address (IPv4): "192.168.1.1"

  • Example to enter the IP address (IPv6): "fe80::220:6bff:fe10:2f16"

[Login Name]

Enter the login name used for POP authentication (using up to 63 characters).

[Password]

Enter the password for POP authentication (using up to 15 characters).

[APOP Authentication]

When using APOP Authentication, set this option to ON (default: OFF).

[Connection Timeout]

If necessary, change the time-out time to limit a communication with the E-mail server (POP) (default: [30] sec.).

[Port Number]

If necessary, change the port number of the E-mail server (POP) (default: [110]).

[Use SSL/TLS]

When using SSL communications, set this option to ON (default: OFF).

  • [Port No.(SSL)]: If necessary, change the port number for SSL communication (default: [995]).

[Certificate Verification Level Settings]

To validate the certificate during SSL communication, select items to be verified.

  • [Expiration Date]: Confirm whether the certificate is within the validity period (default: ON).

  • [CN]: Confirm whether CN (Common Name) of the certificate matches the server address (default: OFF).

  • [Key Usage]: Confirm whether the certificate is used according to the intended purpose approved by the certificate issuer (default: OFF).

  • [Chain]: Confirm whether there is a problem in the certificate chain (certificate path). The chain is validated by referencing the external certificates managed on this machine (default: OFF).

  • [Expiration Date Confirmation]: Confirm whether the certificate has expired (default: OFF). The expiration date confirmation is performed in the order of OCSP (Online Certificate Status Protocol) service, and CRL (Certificate Revocation List).

[Check for New Messages]

When periodically connecting to the E-mail server (POP) to check whether E-mails arrive or not, set this option to ON (default: ON).

  • [Polling Interval]: Specify an interval to check whether E-mails arrive or not (default: [15] min.).