Q. Can I easily copy various cards such as an insurance card or driver license card?

Operation method

  1. Place a card on the Original Glass.

  2. Tap [Copy] on the main menu of classic style.

  3. Tap [Paper], select a paper tray to load paper into in order to copy a card, then tap [Close].

    supplementary explanationIf you specify [Card Shot], you must specify a paper tray other than [Auto].

  4. Tap [Application], then select [Card Shot].

  5. Tap [ON], then configure each item so that it corresponds with the finishing image.

    Setting

    Description

    [Original Size]

    Enter the size of a card to be copied. Alternatively, you can recall the preregistered size from [Registered Paper Size].

    After you have entered the size, select a key in [Registered Paper Size], and tap [Register]. Then the size you have entered is registered in the memory.

    [Registered Paper Size]

    Displays the sizes registered in memory.

    When you call a registered size from the memory, tap the key of the desired registration name, then tap [Recall].

    To change a registration name, select a desired key, then tap [Change registered size name].

    [Layout]

    Select how to arrange the front and back sides of a card on paper.

    [Zoom]

    Select a zoom ratio for copying.

    • [Full Size]: Copy by enlarging according to the paper size.

    • [x1.0]: Copy with the same size as the card.

  6. Tap [OK].

  7. Use the Start key to scan the front side of the card.

  8. Turn the card over, and place it on the Original Glass.

  9. Use the Start key to scan the back side of the card.

  10. After both sides of the card have been scanned, tap [Finish].

  11. Use the Start key to start copying.