Sending (Basic Operation Flow)

  1. Load the original.

    supplementary explanationWhen loading the original into the ADF, pull out the Document Stopper (1) to prevent the scanned original from falling.

  2. Tap [Internet Fax] on the home screen.

  3. Specify the destination.

    supplementary explanationFor details on how to specify a destination, refer to [Specifying a Destination] .

  4. Specify transmission options as needed.

    supplementary explanationSpecify the size of the target original in [Scan Size] (default: [8-1/2 11] (inch area)/[A4] (centimeter area)). If you fail to set the original size correctly, the image may be cut off.

    supplementary explanationFor details on option settings, refer to [Transmission Option Settings] .

  5. Use the Start key to start transmission.

    supplementary explanationUsing the Stop key enables you to stop scanning the original. A list of the currently stopped jobs is displayed. To stop transmission, select the target job from the list, and delete it.

Tips

  • When an Internet fax is sent, a TX result report is printed on this machine. With the TX result report, you can check for successful fax transmission.

  • When the destination machine receives an Internet fax, an MDN message is printed on this machine. With the MDN Message, you can check that the destination machine receives the fax normally.

Reference