Copying (Basic Operation Flow)

Load the original.

When loading the original into the ADF, pull out the Document Stopper (1) to prevent the scanned original from falling.

Display the Copy screen of classic style.

For details on how to display the screen, refer to [Displaying the Copy Screen] .

Set copy options as needed.

Select [Original Settings] - [Original Size], and specify the size of the target original (default: [8-1/2 11] (inch area)/[A4] (centimeter area)). If you fail to set the original size correctly, the image may be cut off.

For details on option settings, refer to [Copy Option Settings] .

A setting change is reflected on the image of [Output]. Therefore, you can configure settings while checking the output image.

If necessary, specify the number of copies using the keypad.

Tapping [No. of Sets] displays the keypad.

To change the number of copies, tap [C] (Clear).

Use the Start key to start copying.

If desired, tap [Check Setting] before starting a copy, and check the setting.

To cancel copy, use the Stop key to stop copying. A list of the currently stopped jobs is displayed. Select the target job from the list, and delete it.

If [Ready to accept another job.] is displayed during printing, you can scan the next original.