* Enter the name of the utility key. You can search descriptions of utility keys.
Finisher Adjustment
To display: [Utility][Administrator Settings][System Settings][Expert Adjustment][Finisher Adjustment]
Adjust the staple, punch or fold position.
Settings | Description |
|---|---|
[Center Staple Position] | If the staple position is not on the fold line on saddle-stitched paper, use this option to align the staple position on the fold. For details, refer to [Center Staple Position] . |
[Half-Fold Position] | If the half-fold position is not on the exact center of the paper, use this option to align the fold on the center. For details, refer to [Half-Fold Position] . |
[1st Tri-Fold Position Adjustment] | If the tri-fold positions are not located evenly, use this option to adjust the first fold position. For details, refer to [1st Tri-Fold Position Adjustment] . |
[2nd Tri-Fold Position Adjustment] | If the tri-fold positions are not located evenly, use this option to adjust the second fold position. For details, refer to [2nd Tri-Fold Position Adjustment] . |
[Punch Horizontal Position Adjustment] | If the positions of the punch holes on the paper are displaced sideways, use this option to adjust the punch hole positions. For details, refer to [Punch Horizontal Position Adjustment] . |
[Punch Regist Loop Size Adjustment] | If the positions of the punch holes on the paper are not in parallel with the paper edge, use this option to correct the obliquity of the paper to make them parallel. For details, refer to [Punch Regist Loop Size Adjustment] . |
[Paper Alignment Plate Settings] | If paper is not discharged with the edges aligned, use this option to adjust the effective width of the paper alignment plate for making discharged paper stored neatly. For details, refer to [Paper Alignment Plate Settings] . |
1st Tri-Fold Position Adjustment
2nd Tri-Fold Position Adjustment
Punch Horizontal Position Adjustment