[Accessibility]

[Touch Panel Adjustment]

Adjust a position to tap the Touch Panel. For details, refer to [Adjusting a position to tap the Touch Panel] .

[Brightness Adjustment]

Adjust the brightness level of the Touch Panel. For details, refer to [Adjusting the brightness of the Touch Panel] .

[Key Repeat Start/Interval Time]

Change the time from pressing a key to starting a key repeat, and the interval to enter successive characters. For details, refer to [Adjusting the time to hold down a key] .

[Default Enlarge Display Settings]

Change the default settings (settings when the power is turned on, or the Reset key is pressed) in Enlarge Display mode. You can change the default setting by selecting Current Setting after the setting of each function is changed. For details, refer to [Changing the default in the Enlarge Display mode] .

[System Auto Reset Confirmation]

Select whether to display a confirmation screen and check cancellation of the Enlarge Display mode when the system auto reset function has worked. When displaying the screen, select the length of time to display the screen. For details, refer to [Displaying the confirmation screen when canceling the Enlarge Display mode] .

[Auto Reset Confirmation]

Select whether to display a confirmation screen and check resetting of setting values when the auto reset function has worked. When displaying the screen, select the length of time to display the screen. For details, refer to [Displaying the confirmation screen when resetting settings] .

[Enlarge Display Mode Confirmation]

Select whether to display a confirmation screen and check if switched into Enlarge Display when [Enlarge Display] is tapped. For details, refer to [Displaying the confirmation screen when changing to the Enlarge Display mode] .

[Message Display Time]

Change the time to display a message on the Touch Panel. For details, refer to [Changing the message display time] .

[Color Reversal Screen]

Inverts the color to display the screen. For details, refer to [Inverting the screen display color] .

[Sound Setting]

Select whether to output keying or warning sounds. If necessary, adjust the volume. For details, refer to [Configuring keying and warning sounds] .

[Voice Guidance Settings]

Change the volume and replay speed of voice guidance. This option is displayed only when [Utility] - [Administrator Settings] - [Voice Guidance Settings] - [Voice Guidance] is set to [Yes]. For details, refer to [Changing the Volume and Replay Speed of Voice Guidance] .

[Double tap setting]

Select whether continuous tapping of the same key is detected as a double-tap operation. For details, refer to [Setting an operation for continuous tapping] .