HomeDescriptions of Functions / Utility KeysFTP

FTP

To display:
  • [Classic Style]
    • [Scan/Fax]
      • [Direct Input]
        • [FTP]

Directly enter destination information for FTP transmission.

Setting

Description

[Host Name]

Enter the destination host name or IP address (using up to 253 bytes).

  • Example to enter the host name: "host.example.com"

  • Example to enter the IP address (IPv4): "192.168.1.1"

  • Example to enter the IP address (IPv6): "fe80::220:6bff:fe10:2f16"

[File Path]

Enter the folder name of the host specified in [Host Name] (using up to 127 bytes). When not specifying the folder name, enter only "/".

  • Example to enter the folder name: "scan"

  • Example to enter the folder name in the folder: "scan/document"

[User Name]

If authentication is required in the FTP server, enter the available user name to log in (using up to 64 characters).

[Anonymous]

When authentication is not required in the FTP server, set this option to ON (default: OFF).

[Password]

Enter the password (using up to 64 characters, excluding double quotation marks ").

[Port Number]

If necessary, change the port number (default: [21]).

[Proxy]

When a proxy server is used in your environment, set this option to ON (default: OFF).

[PASV]

When the PASV mode is used in your environment, set this option to ON (default: OFF).