Paper Jam in ADF

For Reverse Automatic Document Feeder DF-632

For Reverse Automatic Document Feeder DF-714

NOTICE

  • When closing the Opening and Closing Guide, press the Hand mark in the center and check that it is locked securely.

Paper Jam at Right-side Door

When removing pieces of paper in the paper tray (Tray 1/2)

Release the lock as shown in the figure, pull out the paper tray, then remove any unnecessary pieces of paper.

CAUTION

  • The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.

Paper Jam in Paper Tray

When removing pieces of paper in the paper tray (Tray 1/2)

Release the lock as shown in the figure, pull out the paper tray, then remove any unnecessary pieces of paper.

NOTICE

  • Be careful not to touch the surface of the Transport Roller with your hand.

CAUTION

  • The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.

Paper Jam in Large Capacity Unit

NOTICE

  • Be careful not to touch the surface of the roller with your hand.

CAUTION

  • The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.

Paper Jam in Finisher FS-539 or Finisher FS-539 SD

Sections inside the finisher prone to paper jams vary depending on the settings for [Finishing].

Tips

  • The figure shows the Finisher FS-539 SD equipped with Punch Kit PK-524 and Relay Unit.

CAUTION

  • The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.

Sections inside the finisher prone to paper jams vary depending on the settings for [Finishing].

Tips

  • The figure shows the Finisher FS-539 SD equipped with Punch Kit PK-524 and Relay Unit.

NOTICE

  • When moving the Saddle Stitcher, be sure to only hold the handle. Otherwise, your hand or finger may get caught in the machine.

Paper Jam in Finisher FS-533

Sections inside the finisher prone to paper jams vary depending on the settings for [Finishing].

Tips

  • The figure shows the Finisher FS-533 equipped with Punch Kit PK-519.

CAUTION

  • The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.

Paper Jam in Job Separator JS-506

CAUTION

  • The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.