Setting the Serverless Pull Printing Group Configuration
Searching for devices on the network for setting
Start the LK-114_SetupTool execution file.
Click [Search Devices].
The devices for which the serverless pull printing function is enabled are displayed in the list.
Configure device information in [Device Setting Information] to update the list contents.
To change the device information in the list, select the desired device information, change the [Device Setting Information] setting, and click [Apply].
To add new device information to the list, set the information of the device to be added in [Device Setting Information], and click [Add].
To delete the device information from the list, select the desired device information, click [Delete].
To apply the list contents to the device, click [Apply setting to Devices].
When the setting is complete, exit LK-114_SetupTool.
If the list has been updated, the file save window is displayed when you exit LK-114_SetupTool, and you can save the configuration file. The configuration file can be loaded the next time LK-114_SetupTool is started.
When composing a serverless pull printing group involving different models, you need to permit the quick authentication. For details on how to permit the quick authentication, refer to Here.
Acquiring group information from the topology machine for setting
Start the LK-114_SetupTool execution file.
Click [Acquire setting from TM].
Enter the IP address of the topology machine to acquire the setting, and the user name and password for OpenAPI authentication. Then, click [Acquire].
The serverless pull printing group information in the domain is displayed in the list.
Configure device information in [Device Setting Information] to update the list contents.
To change the device information in the list, select the desired device information, change the [Device Setting Information] setting, and click [Apply].
To add new device information to the list, set the information of the device to be added in [Device Setting Information], and click [Add].
To delete the device information from the list, select the desired device information, click [Delete].
To apply the list contents to the device, click [Apply setting to Devices].
When the setting is complete, exit LK-114_SetupTool.
If the list has been updated, the file save window is displayed when you exit LK-114_SetupTool, and you can save the configuration file. The configuration file can be loaded the next time LK-114_SetupTool is started.
When composing a serverless pull printing group involving different models, you need to permit the quick authentication. For details on how to permit the quick authentication, refer to Here.
Loading the saved configuration file for setting
You can load only the configuration file saved when exiting LK-114_SetupTool.
Start the LK-114_SetupTool execution file.
Click [Read configuration file].
Specify the configuration file to load.
The configuration information of the serverless pull printing group described in the configuration file is displayed in the list.
Configure device information in [Device Setting Information] to update the list contents.
To change the device information in the list, select the desired device information, change the [Device Setting Information] setting, and click [Apply].
To add new device information to the list, set the information of the device to be added in [Device Setting Information], and click [Add].
To delete the device information from the list, select the desired device information, click [Delete].
To apply the list contents to the device, click [Apply setting to Devices].
When the setting is complete, exit LK-114_SetupTool.
If the list has been updated, the file save window is displayed when you exit LK-114_SetupTool, and you can save the configuration file. The configuration file can be loaded the next time LK-114_SetupTool is started.
When composing a serverless pull printing group involving different models, you need to permit the quick authentication. For details on how to permit the quick authentication, refer to Here.