Home Utilize useful functionsCreating Hot Folders

Creating Hot Folders

  1. On the main screen, click [Configuration].

    This displays the [Hot Folders] tab on the [Configuration] screen.

  2. Click [New].

    • If there are the configured hot folders, they are displayed in [Hot Folders].

  3. Select the folder to set as a hot folder and click [Select Folder].

    Example: A folder named "Hot Folder" is selected.

    The selected folder is registered in [Hot Folders].

  4. In [Hot Folders], select the target hot folder. In [Printer] and [Print Setting], select the printer required for the hot folder, then click [OK].

  5. On the main screen, click [Close].

  6. In the confirmation dialog box, click [Minimize to tray].

    • [Exit]: AccurioPro Hot Folder finishes. The hot folder function is not active.
      [Minimize to tray]: The [AccurioPro Hot Folder] screen closes. This is resident on the task tray to monitor the hot folder.
      [Cancel]: The dialog box closes, and the display returns to the main screen.