Home Utilize useful functionsAdding a Job Setting

Adding a Job Setting

Add job settings for printing in AccurioPro Hot Folder.

The example below creates a print setting that the original PDF file of 32 A4 pages is reduced and printed 2 in 1 on both sides of A4 paper.

In the example, the following settings are made.

Setting items:

  • Original Orientation

  • Paper Size

  • Paper Tray

  • Copies

  • Binding Position

  • Print Type

  • Imposition: 2 in 1

  • The setting items may differ depending on the printer type used and the configuration of options.

  • Each printer can contain multiple job settings.

  1. In the main screen, select the printer and click [New].

    The print setting screen is displayed.

  2. In the [General] tab, configure each item.

    Example: The following items are set.

    Item

    Setting

    [Original Orientation]

    [Portrait]

    [Paper Tray]

    [Tray 1]

    [Copies]

    10

  3. Click the [Layout] tab, then configure each item. After setting, click [OK].

    Example: The following items are set.

    Item

    Setting

    [2-Sided]

    Check

    [Imposition]

    [2 in 1 (Full Size)]

    [Binding Position]

    [Top Bind]

    [Paper Size]

    [A4]

  4. In [New Settings], enter the print setting name.