Home Daily CareRestoring Settings Manually

Restoring Settings Manually

When Reset on the control panel is pressed on the [COPY] screen, [SCAN] screen, or [STORE] screen, the machine clears all the conditions specified so far and restores arbitrary settings. This function is called Reset.

If Reset on the control panel is pressed on the [SCAN] screen, all the selected destinations are reset. However, the scan conditions specified on the Scan Settings screen are not reset.

If Reset on the control panel is pressed on the Scan Settings screen, settings are reset to arbitrary settings. The destinations selected on the [SCAN] screen are not reset.

Select whether to enable one of the following options as arbitrary settings.

  • [Full Auto]:
    Returns to the factory default settings when the machine is reset. However, some settings may be changed.

  • [Initialize]:
    Returns to the setting you selected on the [UTILITY] screen when the machine is reset.

Each option has the following conditions.

Copy conditions specified as Full Auto

These settings cannot be changed except Output Setting.

  • [Bind Direction]: [Right&Left]

  • [Direction]: [Normal]

  • [Type]: [Text/Photo (Print)]

  • [Special]: [Normal]

  • [Thickness]: [Normal]

  • [Original Size]: [Standard]

  • [Copy Density]: 0

  • [Back. Removal]: 0

  • [Red]/[Green]/[Blue]/[Hue]/[Saturation]/[Brightness]: 0

  • [Sharpness]: 0

  • [Contrast]: 0

  • [Distinction]: [Text] 0, [Color] 0

  • [Screen Pattern]: [Auto]

  • [Color Balance]: 0 for all items

  • [Glossy]: Standard (Gloss Setting OFF)

  • [Zoom]: 1.000 (x 1.0)

  • [Simplex/Duplex]: [1->1] (ADF: ON)

  • [Application]: None

  • [Color]: [Full Color]*

  • [Auto Paper]: ON

  • [Output Setting]: [Sort]**

*: When [Mono Energy-save Mode] is set to [ON], the color mode is [Black]. For details, refer to Mono Energy-save Mode: Using Energy-save Mode for Monochrome Printing.

**: When a finisher is connected, settings selected in the utility settings are set ([UTILITY] - [User Setting] - [System Setting] - [Reset Setting] - [Job Reset Setting] - [Finisher Mode when Full Auto]).

Scan conditions specified as Full Auto

These settings cannot be changed except the file type and page setting.

  • [Bind Direction]: [Right & Left]

  • [Direction]: [Normal]

  • [Type]: [Text/Photo (Print)]

  • [Special]: [Normal]

  • [Thickness]: [Normal]

  • [Blank Page Removal]: OFF

  • [Scan Density]: 0

  • [Back. Removal]: 0

  • [Red]/[Green]/[Blue]: 0

  • [Sharpness]: 0

  • [Contrast]: 0

  • [Distinction]: [Text] 0, [Color] 0

  • [Zoom]: 1.000 (x 1.0)

  • [Application]: None

  • [Color]: [Full Color]

  • [Color Space]: [sRGB]

  • [Scan Size]: [Auto Size]

  • [Resolution (dpi)]: [600]

  • [Simplex/Duplex]: [1-Sided]

  • [File Type]*: [PDF]

  • [Page Setting]*: [Package]

* Based on the setting selected in the utility settings ([UTILITY] - [User Setting] - [Scan Setting]). For details, refer to Scan Setting: Setting the Default Values for Scan Functions.

Store conditions specified as Full Auto

The following settings cannot be changed.

  • [Store Setting]: [Hold]

  • [Bind Direction]: [Right&Left]

  • [Direction]: [Normal]

  • [Type]: [Text/Photo(Print)]

  • [Special]: [Normal]

  • [Thickness]: [Normal]

  • [Scan Density]: 0

  • [Back. Removal]: 0

  • [Red]/[Green]/[Blue]: 0

  • [Sharpness]: 0

  • [Contrast]: 0

  • [Distinction]: [Text] 0, [Color] 0

  • [Zoom]: 1.000 (x 1.0)

  • [Application]: None

  • [Scan Size]: [Auto Size]

  • [Simplex/Duplex]: [1-Sided]

  • [Color]: [Full Color]

Copy, scan, and store conditions specified as Initialize

The conditions are specified on the following screens.

[Copy Initial Setting] screen of the [UTILITY] screen

[Scan Initial Setting] screen of the [UTILITY] screen

[Store Initial Setting] screen of the [UTILITY] screen

For details, refer to Copy Initial Setting: Setting the Default Copy Conditions, Scan Initial Setting: Setting the Default Scan Conditions, or Store Initial Setting: Set the initial conditions for file saving..

If Mode Memory Auto Call is ON and data exists in No. 30 of the Copy Mode Memory, Scan Mode Memory, or Store Mode Memory, the conditions return to the settings in Mode Memory No. 30.

If Mode Memory Auto Call is OFF or data does not exist in No. 30 of the Copy Mode Memory, Scan Mode Memory, or Store Mode Memory, the conditions comply with [Copy Initial Setting], [Scan Initial Setting], or [Store Initial Setting].

Conditions registered to Copy Mode Memory, Scan Mode Memory, or Store Mode Memory [No.30]

These conditions are registered by pressing Mode Memory on the control panel.

When Reset is applied, the following settings become effective.

Effective Setting

Reset Button Function*

Mode Memory Auto Call*

Whether or not data exists in Copy Mode Memory, Scan Mode Memory, or Store Mode Memory No. 30

Full Auto

Full Auto

-

-

Initialize

Initialize

ON

NO

OFF

-

Copy Mode Memory, Scan Mode Memory, or Store Mode Memory No. 30

Initialize

ON

YES

*: Within [UTILITY] - [User Setting] - [System Setting] - [Reset Setting] - [Job Reset Setting]

Conditions common to the arbitrary settings

The following conditions function in common, irrespective of the selection made from Full Auto, Initialize, and conditions registered to Copy Mode Memory, Scan Mode Memory, or Store Mode Memory No. 30.

  • [Change User]: [ON], [OFF]

  • [ADF Original Direction]: [Reset], [Not Reset]

  • [Initial by KeyCounter Insert]: [ON], [OFF]

  • [Status Hold When Auto Reset]: [Not Keep], [Keep]

  • [Next Job Staple Setting]: [Release], [Do Not Release]

  • [Original Set/Bind Direction]: [Release], [Do Not Release]