Name | AccurioPress C2070P | |
Type | Console type | |
Color correspondence | Full Color | |
Printing process | Quad-drum tandem laser electrostatographic process | |
Photoconductor | OPC | |
Developing system | Dry, dual-component reverse magnetic brush developing | |
Transfer method | Belt/Roller | |
Fusing method | Belt | |
Printing resolution: | Main scanning: 3,600 dpi equivalent | |
Gradation/Color | 256 gradations (8-bit)/16.7 million colors | |
Paper weight (Main body tray) | Plain, Fine, Color Specific: 62 g/m2 to 256 g/m2 / 16 lb Bond to 68 lb Bond* Coated-GL, Coated-ML, Coated-GO, and Coated-MO: 81 g/m2 to 256 g/m2 / 22 lb Bond to 68 lb Bond* *: 217 g/m2 to 256 g/m2 / 58 lb Bond to 68 lb Bond are limited to paper size A4 or 8.5 11 or more. | |
Paper size (Main body tray) | • Tray 1 (upper tray) Standard: A3 , B4 , SRA4 /*, A4 /, B5 /, A5 , 11 17 , 9 11 , 8.5 14 , 8.5 11 /, 5.5 8.5 , 8 13 , 8K , 16K / Custom: Widthwise 139.7 mm to 330.2 mm, Lengthwise 182 mm to 431.8 mm / Widthwise 5.5" to 13", Lengthwise 7.17" to 17" Tab paper: A4T , 8.5 11T • Tray 2 (lower tray) Standard: SRA3 , A3 , B4 , SRA4 /*, A4 /, B5 /, A5 , 13 19 , 12 18 , 11 17 , 9 11 , 8.5 14 , 8.5 11 /, 5.5 8.5 , 8 13 , 8K , 16K / Custom: Widthwise 139.7 mm to 330.2 mm, Lengthwise 182 mm to 487.7 mm / Widthwise 5.5" to 13", Lengthwise 7.17" to 19.2" Tab paper: A4T , 8.5 11T *1: Metric area only B series is set to JIS or ISO standard sizes as the default setting. This setting depends on the destination. For JIS/ISO switching, contact your service representative. Detectable standard sizes can be changed. K sizes can also be detected when the machine is set to use them on the [UTILITY] screen. For details, refer to K Size: Selecting Whether or Not to Use K Size Paper. | |
Paper feed method / Paper tray capacity (Main body tray) | Tray 1 (upper tray): 500 sheets (80 g/m2 / 21 lb Bond), Tray 2 (lower tray): 1,000 sheets (80 g/m2 / 21 lb Bond) | |
Paper size for delivery in the machine | 1-sided straight output/2-sided | Standard: SRA3 , A3 , B4 , SRA4 /, A4 /, B5 /, A5 /, B6 , A6 , 13 19 , 12 18 , 11 17 , 9 11 , 8.5 14 , 8.5 11 /, 5.5 8.5 , Foolscap*, 8K , 16K / Custom:
Tab paper: A4T , 8.5 11T *: Foolscap refers to 8.5 13 , 8.25 13 , 8.12 13.25 , and 8 13 . |
1-sided reverse output | Standard: SRA3 , A3 , B4 , SRA4 /, A4 /, B5 /, A5 , 13 19 , 12 18 , 11 17 , 9 11 , 8.5 14 , 8.5 11 /, 5.5 8.5 , Foolscap*, 8K , 16K / Custom: Widthwise 139.7 mm to 330.2 mm, Lengthwise 182 mm to 487.7 mm / Widthwise 5.5" to 13", Lengthwise 7.17" to 19.2" Tab paper: A4T , 8.5 11T *: Foolscap refers to 8.5 13 , 8.25 13 , 8.12 13.25 , and 8 13 . | |
Paper weight for delivery in the machine | Reverse output: 62 g/m2 to 300 g/m2 / 16 lb Bond to 81 lb Bond 2-sided output: 62 g/m2 to 350 g/m2 / 16 lb Bond to 93 lb Bond | |
Printing speed | 71 sides/min. (A4 ), 70 sides/min. (8.5 11 ) | |
Continuation Print | 1 to 9,999 copies | |
Standard memory | Image memory: 5 GB System memory: 4 GB | |
Expansion memory | System memory can be expanded up to 16 GB with Image Controller IC-603 and Upgrade Kit UK-104. | |
Image loss | Leading edge: Max. 4 mm, Trailing edge: Max. 4.5 mm, Front and rear edges: Max. 3 mm | |
Warm-up time | 6.5 minutes or less (20°C, 50% RH, rated voltage applied) | |
Power source | Metric area: AC 220 V to 240 V / 21 A, 50 Hz/60 Hz Inch area: AC 208 V to 240 V / 22 A, 60 Hz Australia: AC 220 V to 240 V / 20 A, 50 Hz/60 Hz | |
Maximum power consumption | Metric area: 4,900 W Inch area: 5,200 W Australia: 4,700 W (for the whole system excluding the options with a dedicated power code) | |
Weight | 313 kg / 690.05 lb (the machine only) | |
Dimensions | 800 mm (W)*1 903 mm (D)*2 1,041 mm (H)*3 / 31.50" (W)*1 35.55" (D)*2 40.98" (H)*3 *1: Excluding the control panel, output tray, work table *2: Including the rear duct *3: Excluding the control panel | |
Space requirements | 4,811 mm (W) 1,734 mm (D) / 189.41" (W) 62.27" (D)*1 (the machine + Paper Feeder Unit PF-707 + Relay Unit RU-509 + Folding Unit FD-503 + Saddle Stitcher SD-506 + Finisher FS-532) *1: With the machine fusing unit pulled out | |
Operating temperature | 10 to 30°C | |
Humidity | 10 to 80%RH |