Saddle Stitcher SD-513 (Folding Unit FD-504 + Creaser Unit CR-101 + Trimmer Unit TU-503)
External view of Saddle Stitcher SD-513
No. | Name | Description |
|---|---|---|
1 | Saddle stitcher front door | Opens to allow removal of paper jam. |
2 | Slit scrap box door | Open this door to dispose of scraps into the Slit scrap box when the optional Trimmer Unit TU-503 is mounted on this machine. |
3 | Trim scrap tray | Pull out this tray to dispose of scraps into the Trim scrap box. |
4 | Clamp section upper door | Open this door to remove paper jammed in the folding unit or to clean the Conveyance belt. |
5 | Clamp section | Open this unit to clear paper jams in the fold conveyance unit, saddle stitcher unit, or half-fold unit. Open the Saddle stitcher front door before the Clamp section. |
6 | Clamp section handle | Hold the lock release lever of the handle when opening the Clamp section. When opening the Clamp section, do so while holding the lock release lever of the handle. |
7 | Folding outlet door | Open this door to clear paper jams in the fold output unit. |
8 | Stopper | Prevents sheets stacked in the Bundle exit tray from falling. |
9 | Delivery tray extension (tray) | Open this tray to output paper to the Bundle exit tray. |
10 | Secondary (sub) tray | Outputs paper from the unit in the right of this machine without performing Multi Half-Fold or Multi Tri-Fold. This tray is also used to output 2-side-slit or creased paper when Trimmer Unit TU-503 or Creaser Unit CR-101 is mounted on this machine. |
11 | Paper detection sensor | Detects paper conveyed through the Conveyance belt to prevent output paper from falling. |
12 | Tri-fold tray | Outputs paper folded in Multi Tri-Fold. |
13 | Conveyance belt | Conveys output paper to the left side. |
14 | Bundle exit tray | Stacks paper that is folded and stapled or folded in half on this machine. |
15 | Bundle exit tray outlet | Outputs paper that is folded and stapled or folded in half on this machine. |
16 | Output roller | Aligns to smoothly output paper that is folded and stapled or folded in half on this machine. |
Internal view of Saddle Stitcher SD-513
No. | Name | Description |
|---|---|---|
17 | Lever[SD1] | Opens upward for removal of paper jam. |
18 | Knob[SD2] | Turn this knob to clear paper jams in Creaser Unit CR-101 or paper jams that occur when paper is being fed. |
19 | Lever[SD3] | Open this lever rightward to clear paper jams in Creaser Unit CR-101 or paper jams that occur when paper is being fed. |
20 | Knob[SD4] | Turn this knob to clear paper jams in Creaser Unit CR-101 or paper jams that occur when paper is being fed. |
21 | Creaser Unit CR-101 (option) | Makes creases on paper. |
22 | Lever[SD5] | Open this lever rightward to clear paper jams in Creaser Unit CR-101 or paper jams that occur when paper is being fed. |
23 | Knob[SD15] | Turn this knob clockwise to clear paper jams in Trimmer Unit TU-503. |
24 | Trimmer Unit TU-503 (option) | Trims both edges of paper. |
25 | Slit scrap box | Pull out this box to dispose of slitting scraps. |
26 | Scrap box lock release lever | Pull this to release the lock when pulling out the Slit scrap box. |
27 | Knob[SD16] | Turn this knob counterclockwise to clear paper jams in Trimmer Unit TU-503. |
28 | Knob[SD6] | Turned clockwise for removal of paper jam. |
29 | Knob[SD7] | Turn this knob counterclockwise to clear paper jams. |
30 | Lever[SD8] | Opens upward for removal of paper jam. |
31 | Lever[SD9] | Opens rightward for removal of paper jam. |
32 | Knob[SD10] | Turned clockwise for removal of paper jam. |
33 | Knob[SD11] | Turn this knob counterclockwise to clear paper jams. |
34 | Knob[SD13] | Turned to allow removal of paper jam. |
35 | Lever[SD12] | Opens downward for removal of paper jam. |
36 | Fold & staple section | Staples in the paper center part. |
37 | Stapler | Makes two or four staples for Fold & Staple processing. |
38 | Booklet transfer section | Conveys the folded paper (booklet) to the Clamp section. |
39 | Knob[SD14] | Turned to allow removal of paper jam. |
40 | Secondary (sub) tray cover | Open this cover to clear paper jams in the tri-fold conveyance unit. |
41 | Lever[SD17] | Opens upward for removal of paper jam. |
42 | Lever[SD18] | Opens downward for removal of paper jam. |
43 | Folding Unit FD-504 (option) | Carries out spine corner forming for the folded and stapled booklet. |
44 | Trim scrap box | Contains cut edge trimming scraps. |