Home Paper and OriginalsInstalling Output Extension Tray (Finisher FS-532 / Output Tray OT-510)

Installing Output Extension Tray (Finisher FS-532 / Output Tray OT-510)

Mount Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m (output extension tray) in Finisher FS-532 or Output Tray OT-510.

  1. Press [FS Main Tray Replace] on the [MACHINE] screen.

    The dialog box is displayed, and the main tray lowers (approx. 5 cm).

  2. Insert the brackets (A) of Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m (output extension tray) into the slots (a) of main tray.

  3. Insert the brackets (B) of Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m (output extension tray) into the slots (b) of main tray while carrying out the adjustment by hand.

  4. Extend the tray extension of Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m (output extension tray).

  5. Press [Close] on the dialog box.

    The main tray lifts and returns to the original position.